Set the train
Choose the gear type of each stage, its numbers of teeth and its module. Add stages for a compound train.
Gear ratio calculator
Free gear ratio calculator for gear trains. Set the teeth and the module of each stage, and see the ratio, output speed and torque, with the gears meshing in 3D.
What the tool does
The gear ratio calculator works out a train of one to six stages: spur, helical, double helical, internal, planetary, rack and pinion, bevel and worm gears. For the train it gives the ratio, the output speed and the output torque. For each stage it gives the ratio, the centre distance and the contact ratio. Each tooth is drawn as a gear cutter cuts it, so the gears you see are the gears you calculated.
Choose the gear type of each stage, its numbers of teeth and its module. Add stages for a compound train.
Ratio, output speed and torque for the train. Centre distance, contact ratio and profile shift for each stage.
The gears turn in 3D at the right speeds. Download a TwinWorks picture of the train with its numbers.
Have the gears in a CAD model already? Drop the STEP file in Animate: it finds the gear pairs and turns them.
Divide the teeth of the driven gear by the teeth of the driving gear. A 17-tooth gear that drives a 51-tooth gear gives a ratio of 3 : 1, so the output turns three times slower, with about three times the torque. For a train of stages, multiply the ratios of the stages. A planetary set with its ring held gives 1 + ring teeth / sun teeth. A worm gives wheel teeth / worm starts.
Spur, helical and double helical (herringbone) gears, a pinion in a ring gear, planetary sets, rack and pinion, straight bevel gears at 90 degrees and worm gears. Put up to six of them in one train.
The module sets the size of the teeth: the pitch diameter is the module times the number of teeth. The pressure angle, 20 degrees by default, sets the shape of the teeth. A gear with few teeth is undercut at the root. The calculator adds a profile shift that avoids it, and keeps the centre distance where it can.
Each tooth is the involute that a standard rack cutter (ISO 53 profile A) cuts, so undercut and profile shift look as they do on a real gear. The calculator checks that the teeth of every pair never cross and stay in contact as they turn. Bevel teeth use Tredgold's approximation, and the worm wheel is a helical gear without a throat. Efficiencies are typical values. Check a real design against your standard, such as ISO 6336 or AGMA, before you make the gears.
Yes, with no account and no email. Download a TwinWorks picture of the train with its numbers. The calculator runs in your browser, so nothing is uploaded.
In TwinWorks the gears of your CAD model turn in its 3D twin, and their motion goes into your work instructions and manuals.
Updated