Tap drill chart
Find the drill size for common metric, UNC and UNF threads before tapping. These values are for cutting taps. Use the tap maker’s data for form or roll taps.
Tap drill sizes by thread
Metric
| Thread | Drill (mm) | Drill (in) |
|---|---|---|
| M1.6 × 0.35 | 1.25 | 0.0492 |
| M2 × 0.4 | 1.60 | 0.0630 |
| M2.5 × 0.45 | 2.05 | 0.0807 |
| M3 × 0.5 | 2.50 | 0.0984 |
| M3.5 × 0.6 | 2.90 | 0.1142 |
| M4 × 0.7 | 3.30 | 0.1299 |
| M4.5 × 0.75 | 3.70 | 0.1457 |
| M5 × 0.8 | 4.20 | 0.1654 |
| M6 × 1 | 5.00 | 0.1969 |
| M7 × 1 | 6.00 | 0.2362 |
| M8 × 1.25 | 6.75 | 0.2657 |
| M8 × 1 | 7.00 | 0.2756 |
| M10 × 1.5 | 8.50 | 0.3346 |
| M10 × 1.25 | 8.75 | 0.3445 |
| M12 × 1.75 | 10.20 | 0.4016 |
| M12 × 1.25 | 10.80 | 0.4252 |
| M14 × 2 | 12.00 | 0.4724 |
| M14 × 1.5 | 12.50 | 0.4921 |
| M16 × 2 | 14.00 | 0.5512 |
| M16 × 1.5 | 14.50 | 0.5709 |
| M18 × 2.5 | 15.50 | 0.6102 |
| M18 × 1.5 | 16.50 | 0.6496 |
| M20 × 2.5 | 17.50 | 0.6890 |
| M20 × 1.5 | 18.50 | 0.7283 |
| M22 × 2.5 | 19.50 | 0.7677 |
| M22 × 1.5 | 20.50 | 0.8071 |
| M24 × 3 | 21.00 | 0.8268 |
| M24 × 2 | 22.00 | 0.8661 |
Unified inch
| Thread | Series | Drill | Drill (in) |
|---|---|---|---|
| #4-40 | UNC | #43 | 0.0890 |
| #6-32 | UNC | #36 | 0.1065 |
| #8-32 | UNC | #29 | 0.1360 |
| #10-24 | UNC | #25 | 0.1495 |
| #12-24 | UNC | #16 | 0.1770 |
| 1/4-20 | UNC | #7 | 0.2010 |
| 5/16-18 | UNC | F | 0.2570 |
| 3/8-16 | UNC | 5/16 | 0.3125 |
| 7/16-14 | UNC | U | 0.3680 |
| 1/2-13 | UNC | 27/64 | 0.4219 |
| 9/16-12 | UNC | 31/64 | 0.4844 |
| 5/8-11 | UNC | 17/32 | 0.5312 |
| 3/4-10 | UNC | 21/32 | 0.6562 |
| 7/8-9 | UNC | 49/64 | 0.7656 |
| 1-8 | UNC | 7/8 | 0.8750 |
| #4-48 | UNF | #42 | 0.0935 |
| #6-40 | UNF | #33 | 0.1130 |
| #8-36 | UNF | #29 | 0.1360 |
| #10-32 | UNF | #21 | 0.1590 |
| #12-28 | UNF | #14 | 0.1820 |
| 1/4-28 | UNF | #3 | 0.2130 |
| 5/16-24 | UNF | I | 0.2720 |
| 3/8-24 | UNF | Q | 0.3320 |
| 7/16-20 | UNF | 25/64 | 0.3906 |
| 1/2-20 | UNF | 29/64 | 0.4531 |
| 9/16-18 | UNF | 33/64 | 0.5156 |
| 5/8-18 | UNF | 37/64 | 0.5781 |
| 3/4-16 | UNF | 11/16 | 0.6875 |
| 7/8-14 | UNF | 13/16 | 0.8125 |
| 1-12 | UNF | 15/16 | 0.9375 |
References: Haas Machinist’s CNC Reference Guide for metric and LittleMachineShop cutting-tap chart for inch. Verify the size against the drawing, material and tooling for your job.
Example: an M6 × 1 hole in a motor bracket
The drawing calls for an M6 × 1 tapped hole. Find that thread in the metric table. It lists a 5.00 mm drill for a cutting tap. Confirm that size and the required depths against the drawing and tap maker’s guidance.
In the work instruction, identify the bracket and highlight the hole. Record the approved drill and tap, specify the required thread depth, and show how to inspect the completed feature.
See the conveyor work instruction example